Tuesday, November 20, 2012

Starburst Cake Design Tutorial


Today I was happy to be a part of CakeFu Masters and I offered a training on this cute cake & flower. If you missed out on my Cake Fu tutorial from November 20th, don't fret! Here is the step by step pictorial for you all to enjoy!

From my new line of cutters Flourishes,  I came up with this cute cake design & paper inspired flower using my Starburst cutter set.


 You can create this cake in any colour combination you wish, using any fondant you like.  For this project I wanted a pink & grey colour scheme, so I used white Fondx with a touch of Jet Black Elite to give me a light grey colour. You will also need gumpaste, I used Confectioners Choice white gumpaste


First you will need to cover your cakes.  For this project I was using round cake dummies - 5"x4" round and 6"x5" round.


Here are the tools I used in this project: fondant smoothers, sharp top edger, rolling pin, sharp knife, paint brushpalette knife, gum glue in bottle, CMC (to make glue), clear piping gel, square cutter (largest in set of 3), starburst cutter set.


First we will make the flower.  Here is a picture of what you will need to make the flower as well as the completed flower.



Roll out your gumpaste - at first using the small rolling pin, then once thin enough you can run it through the pasta machine - on mine I went to setting #4


Next you will need to attach the edible image paper.  For this project I used a paper from Lucks, but you can also print your own or use another design or brand.


To attach the paper to the gumpaste, lightly moisten the surface with either water, or here I used edible gum glue - do not over moisten, just enough for the paper to stick.  Carefully attach the paper and make sure it is secure and without air bubbles.


Next you will want to cut out all the Starburst shapes.  For this flower you will need: 21 large triangles - 3 sets of 7 pairs and 14 small triangles - 2 sets of 7 matching pairs.  These cutters are designed like puzzle pieces and fit against one another.  They are also double sided meaning you can cut a mirror image of each shape.


When cutting, try to use your paste in the most efficient manner possible to avoid waste.  See here how I've cut the shapes and paired them up as I go to make sure I have enough.  I'm also maximizing my paste by cutting the shapes close together. Be sure to trim away any jagged pieces if you get them. Tip to avoid that: keep your cutter edge clean.


You can assemble the flower once all the pieces have been cut.  It works best if the paste is slightly dry.  Make sure you have cut the gumpaste square and that it is also somewhat dry.  Add gum glue (not too much) to entire square surface.


Stage 1: Starting with the large pairs of triangles, arrange them on the square working all the way around like a star shape.


Keep working all the way around the square - I went in a counter clockwise fashion, but you can also go clockwise! ;) Just make sure to place each pair tightly against each other.


Here is stage 1 complete - a star shape which you can stop here or go on to the next stage.


Stage 2: Using the last 7 large triangles, arrange standing upright all around star at mid point of each point.

To attach: use clear piping gel painted on with paintbrush along bottom edge.


Here is a detail shot of where to paint piping gel.


When placing the pieces, be sure to have the pattern side all facing in the same direction.


Here is stage 2 completed - again note the pattern side all faces the same direction.


Stage 3: With the small triangle pairs (looks like a kite) paint 2 edges (bottom edge and top side which will attach) with piping gel and secure as a pair in between each standing piece.


Here is a detail shot of placement


Continue all the way around the star adjusting as you need until all spaces are filled.


Here is the completed flower.  Allow flower to dry before placing on cake.  To secure flower to the cake side, I used melted coating chocolate as it sets up quickly and securely.


Side pattern design: You can use the shapes to create a multitude of pattern designs.  You can space them out as I did by eye, or you can do the math and work it all out!  For me, I cut out enough triangles to go around the diameter of my cake and place them all around the cake laying on the board, spacing them out as I go.  Once I like the spacing, I will attach the shapes to the side of the cake using gum glue.


From rolled piece of gumpaste - cut out shapes as many as you require to complete your design.  Practice different configurations on a flat surface or the counter prior to attaching to the cake.


Here is the start of my chosen pattern.  For this pattern I needed 2 matching sets of the large triangles and 4 matching sets of the small triangles.


Continue the design up one full side of the cake so you can see your spacing and configuration.  Then work your way around the cake to fill in the entire design.


When using the gum glue, you do have a bit of time to adjust the pieces if required.  Instead of using your fingers to move the shapes around, try using the small palette knife or better a pair of them.  The straight edge will reduce the risk of distorting the shape.


Use your fettuccine attachment to cut the bands of gumpaste for your border.  Roll a long strip of gumpaste to setting #4, then move over to the fettuccine attachment and pass through to cut.


After rolling through the fettuccine attachment you end up with all these strips!  Perfect for borders, shoe laces, curly cues or fill on a wine crate cake!


Create a "common cut" - overlap the band and with a sharp knife cut through both layers - creates a perfect join which is practically seamless! Be sure to remove the underneath excess!


The finished cake design


Close up detail of the flower


Close up detail of the pattern


I hope you all enjoyed this mini tutorial!

Lisa

4 comments:

Special Occasions, Cakes etc said...

It was a great session today. I really enjoyed it!

Joanne
Special Occasions - Cakes, Etc

Special Occasions, Cakes etc said...

It was a really great session today. I truly enjoyed it.

Joanne
Special Occasions - Cakes, Etc

Charmed Stones said...

Gratitude for this tutorial I'm in BUGEJA HEAVEN!!! Purchasing several of your cutters thanks for sharing truly!

S.L. Webb Photography said...

Genius...using the fettuccine cutter for the gumpaste...I have my pasta roller attached to my work table and never one thought ... hmm I wonder if the cutter would work...DOH...sure would have save time if I had...LOL. This is a great tutorial and Flour confections is a favourite supplier.